Polycom RMX 1500 User Manual

1RMX® 1500 Installation & Configuration GuideGeneral Safety PrecautionsFollow these rules to ensure general safety:• Keep the area around the Poly

1016 Click the Save & Continue button.During the initial RMX setup, if the system detects the presence of the RTM ISDN card, the ISDN /PSTN Networ

1118 Click Next.19 In the PRI Settings dialog box, define the following parameters: Span Type Select the type of spans (ISDN/PSTN) lines, supplied by

1220 Click Next.21 In the Span Definition dialog box, define the following parameters:Num Plan Select the type of signaling (Number Plan) from the lis

1322 Click Next.The Phones dialog box opens.23 To define dial-in number ranges click the Add button.24 In the Add Phone Number dialog box, define the

14The Spans dialog box opens displaying the following read-only fields:— ID – the connector on the RTM ISDN card (PRI1 to PRI12).— Service – the ISDN/

1532 In the Fast Configuration Wizard - System Flags dialog box, enter the following information:These flags can be modified later, if required, via t

1633 Click Save & Close.The RMX confirms successful configuration.34 In the Success Message box, click OK.35 In the Reset Confirmation dialog box,

17User DefinitionThe RMX is shipped with a default Administrator user called POLYCOM. Once you have defined other authorized administrator users, it i

18Selecting the RMX Web Client LanguagesBy default, the RMX Web Client interface is displayed only in English. However, the system administrator can c

19For more information on ISDN Network Services, see the RMX 1500/2000/4000 Administrator’s Guide, "ISDN/PSTN Network Services” on page 13-43.If

2If ISDN/PSTN is installed in your conferencing environment, obtain the following information from your ISDN/PSTN Service Provider: • Switch Type, Lin

20ISDN/PSTN ParticipantsISDN and PSTN participants can connect to conferences and Meeting Rooms directly or via an Entry Queue by dialing one of the n

3When the RMX is installed for the first time, you must change the default IP addresses to your local network settings. This can be done by modifying

4— Optional. Connect the Shelf Management cable to the Shelf port.— Connect the E1/T1 cables to their PRI (1-4) ports (if applicable)First Entry Power

5Connecting to the MCU1 Start the RMX Web Client application on the workstation by entering in the browser’s address line the IP Address of the contro

61 In the Fast Configuration Wizard - IP dialog box, define the following parameters:2 Click Next.3 In the Fast Configuration Wizard - Routes dialog b

76 Click the Next button.7 In the Fast Configuration Wizard - Environment dialog box, select the IP Network Type: H.323, SIP or H.323 & SIP.8 Clic

811 Click Next.12 If you selected H.323 only go to Step 15.Primary GatekeeperIP Address or NameEnter either the gatekeeper’s host name (if a DNS Serve

913 In the Fast Configuration Wizard - SIP dialog box, enter the following information:14 Click the Next button.15 Enter the required Security informa