Polycom 2215-28454-001 Datasheet download pdf (Page 15)

Deployment Guide for Maximum Security Environments

Polycom, Inc. 15

8 On Polycom HDX 4000, 7000, and 8000 series systems, go to System >

Admin Settings > LAN Properties > > , and disable the Enable

PC LAN Port setting, unless its use is required. If you change this setting,

the system restarts.

9 Go to System > Admin Settings > Network > Call Preference, and

configure the following settings on the Call Preference screen.

10 Go to System > Admin Settings > General Settings > Security > Log

Management, and set this setting on the Log Management screen.

Configuring Your System for Remote Access

This section describes how to configure the system to meet the maximum

security requirements for remote access through the RS-232 serial port or

through the HDX system web interface.

When you configure the system to use the Maximum Security Profile, the

system:

• Requires devices that are attempting to start a session through the serial

port to provide either an Admin ID and password or a User ID and

password. If you are connecting interactively using a terminal emulator

program, press Enter to display a login prompt. If you are connecting by

using a serial control application, send a new line character to display a

• Requires you to set separate remote access passwords for both the User

and Admin accounts. The Use the Room Password for Remote Access

setting is automatically disabled in the Maximum Security Profile and is

Setting Description

IP H.323 • Disable this setting for ISDN-only deployments.

• Enable this setting if H.323 calling on IP networks is

required.

SIP SIP is disabled and not configurable in Maximum

Security mode.

ISDN H.320 • Disable this setting for IP-only deployments.

• Enable this setting if ISDN H.320 calling is required.

Setting Description

Percent Filled

Threshold

• Specifies the percent filled level, which triggers a

system alert. Suggested value: 70.

• This alert is mandated by the Application Security

STIG (APP3650 in V3R3).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

No comments

Polycom 2215-28454-001 Datasheet Page 15