Polycom RMX 1500 User Manual download pdf (Page 12)

20 Click Next.

21 In the Span Definition dialog box, define the following parameters:

Num Plan Select the type of signaling (Number Plan) from the

list according to information given by the service

provider.

Default: ISDN

Note: For E1 spans, this parameter is set by the

system.

Net Specific Select the appropriate service program if one is used

by your service provider (carrier).

Some service providers may have several service

programs that can be used.

Default: None

Dial-out Prefix Enter the prefix that the PBX requires to dial out.

Leave this field blank if a dial-out prefix is not required.

The field can contain be empty (blank) or a numeric

value between 0 and 9999.

Default: Blank

Field Description

Framing Select the Framing format used by the carrier for the

network interface from the list.

• For T1 spans, default is SFSF.

• For E1 spans, default is FEBE.

Side Select the RMX side on the network.

Default: User side

Note: If the PBX is configured on the network side,

then the RMX unit must be configured as the user

side, and vice versa, or both must be configured

symmetrically.

Field Description

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Polycom RMX 1500 User Manual Page 12