Polycom SOUNDSTATION IP3000 User Manual download pdf (Page 6)

SoundStation IP 3000 Installation Instructions and User’s Guide

2

Caution: Be sure to read the Release

Notes (online at www.polycom.com)

and both the Parts List and the Safety

Notices sections in this guide before

you set up and use this product.

Installing SoundStation IP 3000

Preparing for Installation

To install the SoundStation IP and connect

it to the network, complete the following

steps.

1 Place the SoundStation IP on a flat

surface (such as a conference room table

or desktop), with a power outlet and a

data network port nearby.

2 Connect one end of the 6 ft. data cable

to your data network port.

Connect the other end to the network

(LAN) port on the PIM.

3 Connect the 25 ft. data cable to

the RJ-45 port on the bottom of the

SoundStation IP. (The other end of this

cable is pre-plugged into the PIM.)

4 Connect the power adapter to the AC

adapter port on the PIM.

5 Plug the other end into a standard

electrical power outlet in the wall.

Installing and Connecting to the Network

When you have finished connecting the

phone, a start-up process will automatical-

ly begin. During this process, which may

last several minutes, the LCD will display

a sequence of screens. When the process

is complete, and your SoundStation IP

is ready for use, you will hear a tone

indicating that the unit has been initialized.

The LCD will appear as shown:

If you are installing the SoundStation IP

yourself, first:

 Verify that your system administrator

has prepared the network and IP

telephony infrastructure for the

SoundStation IP 3000.

Data

Network

Port

AC Power

PIM

AC Adapter

2

3

4

5

Bottom of IP 3000

RJ-45 Port

Startup Sequence

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments