Polycom RMX 1500 User Manual download pdf (Page 6)

1 In the Fast Configuration Wizard - IP dialog box, define the following

parameters:

2 Click Next.

3 In the Fast Configuration Wizard - Routes dialog box, enter the IP

address of the default router.

4 Click Next.

5 Enter the required DNS information in the dialog box.

Field Description

IP Service

Name

Use the default name (Default IP Service) or enter a name

using up to 20 characters.

Note: This field is displayed in all dialog boxes.

Signaling Host

IP Address

Enter the IP address of the Central Signaling host. This is

the address used by endpoints for dialing in to the MCU.

Media Card 1

IP Address

Enter the IP address of the media card (MPMx) as

provided by the network administrator. Endpoints connect

to conferences and transmit call media (video, voice and

content) via these addresses.

Subnet Mask Enter the subnet mask of the MCU.

Default value: 255.255.255.0.

If Secured Communication is required on the RMX: complete the

Fast Configuration Wizard, Login, install the Certificate and then

enable the Secured Communication Mode.

Field Description

MCU Host Name Enter the name of the MCU on the network.

Default name is RMX

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Polycom RMX 1500 User Manual Page 6