Polycom ViewStation User Manual download pdf (Page 17)

Getting Started

This chapter explains what you need to get started, what’s in the

box, how to use the remote control, how to up the ViewStation, how

to configure the ViewStation for a specific network interface, and

how to use ViewStation help.

What You Need to Get Started

The following items are required:

• A television monitor

• A network connection

• A power source

Additionally, the following items are required for each ViewStation as

listed below:

• ViewStation H.323 — A Local Area Network (LAN) Ethernet

connection.

• ViewStation H.323 with optional Quad BRI network interface

module — Up to four ISDN lines from the ISDN service provider

and an optional Ethernet LAN connection if H.323 is used.

• ViewStation H.323 with optional Avaya DCP network interface

module — Up to four DCP lines from a Definity PBX. The

ViewStation DCP uses the wall jack ports connected to the

Lucent Definity PBX and an optional Ethernet LAN connection if

H.323 is used.

• ViewStation 128 — An ISDN line for up to 128 Kbps video

communications and an optional Ethernet LAN connection if

H.323 is used.

• ViewStation H.323 with V.35 network interface module —

Access to a Data Communications Equipment (DCE) or Data

Service Unit (DSU) and an Ethernet LAN connection if H.323 is

used.

• ViewStation MP (Quad BRI or Avaya DCP with Multi-Point

calling, and up to four ISDN or DCP lines) — A software license

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 249 250

No comments

Polycom ViewStation User Manual Page 17