Polycom V2IU User Manual download pdf (Page 10)

User Guide V

IU 6400-S Converged Network Appliance

1 - 4

Features

• Resolves firewall traversal problems at the Network Operations Center for

VoIP by providing a VoIP application layer gateway (ALG) or voice and

video aware firewall that supports SIP, MGCP and H.323

• Resolves firewall traversal problems at customer offices for VoIP by

providing NAT-Traversal capability for SIP.

• Supports up to 10,000 concurrent VoIP calls or up to 85 Mbps of H.323

video traffic

• Protects the enterprise LAN using a stateful packet inspection (SPI)

firewall for both voice and data traffic

• Performs static IP routing

• Provides integrated test tools to facilitate problem isolation

• Performs TFTP relay for IP phone images

• Uses a simple web based GUI for configuration and management

• Supports logging to external syslog servers and interfaces to network

management systems using SNMP

Physical Connections and Specifications

Port Description

Subscriber (ETH0) Ethernet

Port 1

This port is a 10/100/1000 auto sensing

port. It is connected through an Ethernet

switch to IP phones, IADs or PCs installed

on the public network.

Provider (ETH1) Ethernet

Port 2

This port is a 10/100/1000 auto sensing

port. It is connected to the private network.

Out of Band Management

Port 3

This port can be configured to allow out of

band management sessions. It is typically

connected to a private management

network.

Console Port (COM 1) This port is used to establish a local

console session with the EdgeProtect

using a VT100 terminal or emulation

program. The baud rate is 9600. It is used

for debug or local diagnostic purposes

only.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 81 82

Comments to this Manuals

No comments

Polycom V2IU User Manual Page 10

Comments to this Manuals

Related products and manuals for Networking Polycom V2IU